Concept Prototype: This initial project was done to demonstrate the feasibility of an inexpensive, low tech approach to cooking food.
To construct this Solar Cooker, used cardboard boxes and Silvered Paper was cut for 12 panels.
Cardboard
Silvered Paper
Silvered Paper glued to Cardboard
Edges taped to back side
12 Panels taped together
Assembled with cords, tightened by twisting them with small wood dowels.
Here are the Panel Patterns in CorelDraw 10 that were used to cut out the Cardboard and Silvered Paper pieces. Aluminum Foil could be used in place of the Silvered Paper.
A Low-Cost Kit containing all of the pieces pre-cut, will soon be available. If you would like to be notified when it is ready, please email us your contact information.
To construct this Solar Cooker, used cardboard boxes and Silvered Paper was cut for 12 panels.
Cardboard Silvered PaperSilvered Paper glued to Cardboard Edges taped to back side 12 Panels taped together Assembled with cords, tightened by twisting them with small wood dowels.Here are the Panel Patterns in CorelDraw 10 that were used to cut out the Cardboard and Silvered Paper pieces. Aluminum Foil could be used in place of the Silvered Paper.
A Low-Cost Kit containing all of the pieces pre-cut, will soon be available. If you would like to be notified when it is ready, please email us your contact information.
